How To Outsmart Your Boss In Repairs To Upvc Windows
How To Outsmart Your Boss In Repairs To Upvc Windows
Blog Article
Repairs to uPVC Windows
uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like aluminum or timber.
It is crucial to wash and oil UPVC windows and doors regularly. This will reduce repair costs and improve the efficiency of energy.
1. Broken Glass
The broken glass in your windows can cause severe damage to your home and may even be fatal. You should take the time to ensure that your windows are in good shape.
Single-pane windows are relatively simple to replace and generally fit into frames of the past easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the old panes. In this situation you'll need find some plastic spacers that will assist the new pane to fit perfectly into the window frame.
Wearing eye protection and thick gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you start working on the glass so that any shards will fall on the fabric instead of landing on the floor where they could be trodden under and cause further damage.
It's a great idea to cover the gap with tape after the glass is removed. This will keep drafts and water from entering your home until a professional is able to fix the window. This will also act as a barrier, deterring any intruders from getting access into your home. If the distance between the window and the door is substantial, you may need to consider a security screen that also includes windows. This will provide the best of both.
2. Sagging
uPVC is durable, energy-efficient and affordable alternative to timber sash window. However, over time, they are susceptible to a range of issues, including sliding. A window that is sagging can cause problems with light, draughts and even security. It's important to take action immediately if you realize that your uPVC windows are falling down.
Repositioning the hinges can aid in fixing a window which is sliding. To accomplish this, you'll need open the window to access the frame. After that, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for an appropriate fit. If you are happy with the fit of the window, tighten the screws to hold them in place.
If you can't reposition the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to loosen. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows are watertight and secure from draughts.
uPVC handles may also loosen up. Often it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. You'll first need to close the window and do a test fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it does not you can use a screwdriver to loosen up the handle. Then turn the mechanism to position.
3. Water Leaks
It is important to act if you get up each morning to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
This is a relatively easy fix that can be completed by any skilled DIYer. Depending on how severe the issue is, the old caulking may need to be removed. When it comes to uPVC repair, you must be careful not to over-caulk. This will make your window harder to clean and decrease its energy efficiency.
Check that any drainage holes are free of debris in them and ensure that the sill pan is properly angled to drain away from the window. In more serious situations, you might need to consider replacing the window.
Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.
It is also important to keep in mind that if the leakage is coming from between the glass in your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. Again this can easily be corrected by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or slack and open in a breeze It could be hinges that are at the fault. These are easily repaired by any skilled DIYer and are usually completed in just a few minutes.
Like any mechanical part hinges will be damaged over time. It is essentially a simple procedure, but it is easier when you have a person to help you hold the frame in place.
It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. You can check this by looking for the arrows on each hinge. This indicates the direction in which the window should open.
Faulty window hinges could be caused by improperly opening the window in a particular way or due to inadequate installation at the factory. This can often be resolved by sending us a photo on our website. We will be happy to give you suggestions.
It is also essential to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. It is recommended to do this at least once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.
5. Draughts
Draughts can be caused by different factors. The hinges may also become misaligned due to wear, causing gaps between the frame and sash. This can be easily repaired by giving them thorough clean, upvc door repair however if they are beyond repair it might be necessary to have them realigned or replaced. Second, the interlock can also become unbalanced. This happens on the hinge's side, and could require to be cleaned. In certain instances it might be necessary to replace these.
The next common reason for draughts is window seals. They are susceptible to being worn out or damaged over time, and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen draughts.
The final method to cut down on the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. They will keep your home warm by blocking out cold air.
With a little maintenance and repairs windows made of upvc will provide a great level of insulation and security for your home. It is important to remember that all windows eventually wear out and it could be cheaper to replace them than to repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with an expert as soon as possible.